Hunter sprinkler head adjustment manual

Adjust to any arc between 40°°. To Decrease arc: Insert the key end of the Hunter wrench into the adjustment socket. While holding the nozzle turret at the right stop, turn the wrench counterclockwise. The wrench will stop turning when adjusted to the maximum arc (°). Do not go past this stop. Adjust to any arc between 40° and °. 1. Insert the plastic key end of the Hunter wrench into the adjustment socket. 2. While holding the nozzle turret at the right stop, turn the wrench clockwise. Each full turn of the wrench will increase the arc 3. Adjust to any arc between Adjust the arc using the Hunter rotor key. The plastic end of the key goes into the rotor cap where two arced arrows point toward a plus and minus. Turning the key toward the plus increases the travel of the rotor, while turning it toward the minus decreases the travel.

1. Insert the plastic key end of the Hunter wrench into the adjustment socket. 2. While holding the nozzle turret at the right stop, turn the wrench clockwise. Each full turn of the wrench will increase the arc 3. Adjust to any arc between 1. Insert the plastic key end of the Hunter wrench into the adjustment socket (Fig. 3 4). 2. While holding the nozzle turret at the right stop, turn the wrench clockwise. Each full ˚ turn of the wrench will increase the arc 90˚. 3. Adjust to any arc between 40˚ and ˚ (Fig. 5). 4. Insert the plastic key end of the Hunter wrench into the adjustment socket; While holding the nozzle turret at the right stop, turn the wrench counterclockwise. Each full ° turn of the wrench will decrease the arc 90°. Adjust to any arc between 40° and °.

1. Insert the plastic end of the Hunter Key into the adjustment socket. 2. While holding the nozzle turret at the right stop, turn the key clockwise. In this section we provide a few manuals along with other information about the basic irrigation clocks Springtime uses. If you need information about a. Insert the plastic key end of the Hunter wrench into the adjustment socket. · While holding the nozzle turret at the right stop, turn the wrench clockwise.